Removing, installing windowbag

AR91.60-D-0693B

Removing, installing windowbag

23.07.2019

Model

906

with code SH9 (Windowbag for driver and co-driver)

Modification notes

30.07.2013

"Perform quick test and delete fault memory" added

Operation steps 11, 12

1

B-pillar paneling

2

Screw

3

Window airbag

4

Screw

5

Check strap for blind rivet nut

6

A-pillar cover

7

Check strap

8

Screw

9

Screw

 Warning

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

Topical note

Notes on performing repair, body work and welding on vehicles with airbags and RTE units

AH91.00-P-0002-01M

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Legal requirements on handling and storing airbags and emergency tensioning retractor units

AH91.00-P-0004-01A

Assessment of airbag and belt tensioner units in accident vehicles

AH91.00-P-0006-01B

 

Remove/install

1

Remove ignition key from ignition lock

2

Loosen B-pillar paneling (1)

AR68.30-D-4700A

 Expose bolt (2) at B-pillar.

3

Unclip A-pillar paneling (6)

4

Unscrew check strap (7) of paneling from A-pillar

 Bolt, arrestor strap for windowbag to A-pillar

*BA91.60-N-1006-01A

5

Disconnect connector from windowbag squib (3)

6

Unscrew screws/bolts (8, 9) at the trigger capsule

 Installation: First put on both screws/bolts (8, 9), then tighten. Bolt together ground line using a bolt (8).

 Bolt, windowbag at A-pillar

*BA91.60-N-1005-01A

7

Unscrew screw/bolt (4) at A-pillar

 Bolt, windowbag at A-pillar

*BA91.60-N-1005-01A

8

Unscrew screw/bolt (2) at B-pillar

 Bolt, windowbag to B-pillar

*BA91.60-N-1007-01A

9

Remove window airbag (3)

 When exchanging the windowbag (3), observe proper and environmentally friendly disposal.

10

Install in the reverse order

11

Connect diagnostic system and perform quick test



AD00.00-D-2000-04SD

12

Read out fault memory of the Supplemental Restraint System (SRS) and delete fault memory

 Airbag

Number

Designation

Model 906

BA91.60-N-1005-01A

Bolt, windowbag at A-pillar

Nm

4

 Airbag

Number

Designation

Model 906

BA91.60-N-1006-01A

Bolt, arrestor strap for windowbag to A-pillar

Nm

4

 Airbag

Number

Designation

Model 906

BA91.60-N-1007-01A

Bolt, windowbag to B-pillar

Nm

4