ar9140w3000a

Removing and installing seat belts on passenger bench seat

Type ar · topic 91.40 · version 0100 · 1999-12-06

Applies to: MODEL 957 with BODY 957.810

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.40 Seat belts, emergency tensioning retractors — Series 957

EinPAS 27 Passive safety/restraint systems › 27.17 Restraint system › 27.17.20 Seat belt/seat belt buckle/seat belt tensioner — Series 957

AR91.40-W-3000A

Removing and installing seat belts on passenger bench seat

12.1.99

MODEL 957 with BODY 957.810

Removing and installing seat belts on passenger bench seat

W91.40-1003-11

Figure item, etc.	Working notes
Installation:	Replace self-locking screws/nuts
	Remove backrest of passenger bench seat	The passenger bench seat is not shown to allow better illustration
1	Bolt for upper belt guide fitting on C-pillar		*BA91.40-N-1001-01F
2	Bolt for belt reel on cab rear wall		*BA91.40-N-1002-01F
3	Bolt for belt end fitting on cab side wall		*BA91.40-N-1003-01F
4	Bolt for belt reel on engine tunnel		*BA91.40-N-1004-01F
5	Bolt for belt buckle on engine tunnel		*BA91.40-N-1005-01F

 Seat belts/emergency tensioning retractors

Number	Designation			Body 957.810 in model 957


BA91.40-N-1001-01F	Bolt for upper belt guide fitting on C-pillar	7/16 ŰNF	Nm	40
BA91.40-N-1002-01F	Bolt for belt reel on cab rear wall	M10	Nm	25
BA91.40-N-1003-01F	Bolt for belt end fitting on cab side wall	M10	Nm	25
BA91.40-N-1004-01F	Bolt for belt reel on engine tunnel	M10	Nm	25
BA91.40-N-1005-01F	Bolt for belt buckle on engine tunnel	M10	Nm	25