Model | 906.657 |
with code P0E (Sprinter Tourer master code) | |
Model | 906.657 |
with code P0F (Master code for Sprinter Tourer 19+1 Inland) | |
Model | 906.657 |
with code P0G (Master code Sprinter Tourer 16+1) | |
Model | 906.657 |
with code P0H (Master code Sprinter Tourer 19+1) | |
Model | 906.657 |
with code PE4 (DCAA bus master code, Argen) | |
Model | 906.657 |
with code PE5 (Mastercode, bus seats on raised base, Argen) |
1 | Seat belt |
2 | Passenger seat backrest |
3 | Seat cushion |
4 | Seat frame base |
5 | Seat belt retractor |
6 | Screw |
7 | Belt end fitting |
8 | Cover |
9 | Seat belt guide bracket |
10 | Screw |
11 | Washer |
12 | Sleeve |
13 | Cover |
D91.40-1163-06
Shown on passenger seat at entrance |
14 | Cover |
D91.40-1164-11
Caution | Risk of injury. Injury may result when the tension in the spring in the automatic belt retractor is released. | Never disassemble automatic belt retractors. | |
Topical note | Notes on self-locking nuts and bolts | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Remove seat cushion (3) | ||
2 | Remove panel (14) at passenger seat | For passenger seat at entrance. | |
3 | Tilt back passenger seat backrest (2) | For passenger double seat. | |
4 | Remove cover (8) | ||
5 | Remove seat belt guide bracket (9) from passenger seat backrest (2) | Remove screw (10) for this. | |
Installation: Note the order of the individual component parts. | |||
Bolt, belt guide bracket to backrest | |||
6 | Mark the installation position of the seat belt retractor (5) on the seat frame base (4) | When replacing the seat frame base (4), copy the marking on the removed seat frame base (4). | |
7 | Remove seat belt (1) with seat belt retractor (5) and seat belt end fitting (7) | Installation: | |
For this, loosen screw (6) while counterholding the nut (6). | |||
Screw, seat belt end fitting and seat belt retractor to seat frame base | |||
8 | Install in the reverse order | ||
| Check | ||
9 | Perform function test on seat belt (1) |
Seat belt/emergency tensioning retractor, passenger seats |
Number | Designation | Model 906.6 with code P0E (Mastercode Sprinter Tourer 16+1 Inland) or code P0F (Mastercode Sprinter Tourer 19+1 Inland) or code P0G (Mastercode Sprinter Tourer 16+1) or code P0H (Mastercode Sprinter Tourer 19+1) or code PE4 (Mastercode Bus, DCAA, Argen) or code PE5 (Mastercode Bus, pedestal seating, Argen) | |
BA91.40-N-1001-02B | Bolt, belt guide bracket to backrest | Nm | 50 |
Seat belt/emergency tensioning retractor, passenger seats |
Number | Designation | Model 906.6 with code P0E (Mastercode Sprinter Tourer 16+1 Inland) or code P0F (Mastercode Sprinter Tourer 19+1 Inland) or code P0G (Mastercode Sprinter Tourer 16+1) or code P0H (Mastercode Sprinter Tourer 19+1) or code PE4 (Mastercode Bus, DCAA, Argen) or code PE5 (Mastercode Bus, pedestal seating, Argen) | |
BA91.40-N-1002-02B | Screw, seat belt end fitting and seat belt retractor to seat frame base | Nm | 45 |
Referenced documents
- ah0000n000101a Notes on self-locking nuts and bolts
- ah6800n000101s Notes on carrying out repair work in the vehicle interior
- ar9121d4502a Remove/install passenger seat cushion
- as9100z000201a Risk of injury. Injury may result when the tension in the spring in the automatic belt retractor is released.