AR91.40-D-1035ECA | Remove/install seat belt of bench seat | 18.3.05 |
MODEL 903.6 with CODE (ZL9) "James Cook" touring camper
Center and right seat belts
D91.40-1117-09
1 Covering
2 Belt buckle
3 Cover
5 Bolts
10 Seat belt
S25/20 Main battery switch
6 Locking plate
7 Bolts
8 Carrier plate
D91.40-1110-09
3 Cover
10 Safety belts
13 Plate
14 Bolts
11 Flap
12 Bolts
| Remove/install | ||
Danger! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | When moving components, ensure that no body parts or limbs are within the operating range of moving parts. | |
1 | Move bench seat forwards | See Operator's Manual | |
2 | Unclip cover (1). | ||
3 | Route covering (1) with belt buckle (2) through belt support opening | ||
4 | Open cover (3) | ||
5 | Turn main battery switch (S25/20) to "OFF" position | ||
6 | Loosen screws (5). | ||
7 | Remove locking plate (6) | ||
8 | Unscrew the screws (7). | ||
9 | Place carrier plate (8) to one side | ||
10 | Open flap (11). | ||
11 | Unscrew the bolts (12). | ||
12 | Remove plate (13) | ||
13 | Remove bolts (14). | Bolt, automatic belt retractor to rear seat | |
14 | Remove seat belts (10) to rear | Remove middle seat belt (10) through opening released by carrier plate (8). | |
15 | Install in the reverse order |
Seat belts/emergency tensioning retractors
Referenced documents
- as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.