AR91.40-D-1035A | Remove/install seat belt on bench seat | 28.4.04 |
MODEL 903.662
with CODE (ZU8) National version for USA
with CODE (Z29) "James Cook" touring camper, NAFTA
Center and right seat belts
D91.40-1114-09
1 Covering
2 Belt buckle
3 Cover
4 12-V main switch
8 Carrier plate
10 Seat belt
5 Bolts
6 Locking plate
7 Bolts
D91.40-1110-09
3 Cover
10 Seat belts
13 Plate
14 Bolts
11 Flap
12 Bolts
| Remove/Install | ||
Danger! | Risk of injury caused by body parts becoming jammed, pinched or severed by doors, covers, flaps or by loose components | Keep body parts well clear when moving doors, covers, flaps and components. Wear protective gloves and protective shoes. | |
1 | Move bench seat forwards | See Operator's Manual | |
2 | Unclip cover (1). | ||
3 | Guide covering (1) with belt buckle (2) through belt support opening | ||
4 | Open lid (3) | ||
5 | Turn 12 V main switch (4) to "OFF" position | ||
6 | Unscrew bolts (5). | ||
7 | Remove locking plate (6) | ||
8 | Unscrew bolts (7). | ||
9 | Place carrier plate (8) to one side | ||
10 | Open flap (11) | ||
11 | Unscrew the bolts (12). | ||
12 | Remove plate (13) | ||
13 | Unscrew bolts (14). | Bolt, automatic belt retractor to rear seat | |
14 | Remove seat belt (10) towards rear | Remove middle seat belt (10) through exposed opening of carrier plate (8). | |
15 | Install in the reverse order |
Seat belts/emergency tensioning retractors
Referenced documents
- as0000z002501a Risk of injury caused by body parts becoming jammed, pinched or severed by doors, covers, flaps or by loose components