ar9130s1900e

Remove/install the seat ventilation motors on the front seat backrest

Type ar · topic 91.30 · version 0102 · 2017-01-09

Applies to: Model 447.8, 448.8 with code SE0 (Seat climate control for driver) Model 447.8, 448.8 with code SE1 (Seat climate control for front passenger)

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.30 Seat heater, seat ventilation — Series 447 (models 8**) · Series 448 (models 8**)

EinPAS 39 Heating/ventilation/cooling › 39.35 Seat heating/seat climate control/armrest heating › 39.35.36 Blower — Series 447 (models 8**) · Series 448 (models 8**)

AR91.30-S-1900E

Remove/install the seat ventilation motors on the front seat backrest

21.12.2016

Model

447.8, 448.8

with code SE0 (Seat climate control for driver)

Model

447.8, 448.8

with code SE1 (Seat climate control for front passenger)

Remove/install the seat ventilation motors on the front seat backrest

Shown on front passenger seat with CODE SF2 (Electrically adjustable front passenger seat) and CODE SE4 (Front passenger seat lumbar support)

1

Electrical connector

2

Backrest padding

3

Wire mat

M18/10

Driver seat backrest seat ventilation motors

M18/12

Front passenger seat backrest seat ventilation motors

S91.30-4508-06

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Remove back shell from backrest of the left or right front seat

AR91.10-S-1915E

2

Remove and disconnect electrical connection (1) from backrest frame

3

Lift wire mat (3) and remove driver seat backrest seat ventilation motors (M18/10) or front passenger seat backrest seat ventilation motors (M18/12) from the backrest padding (2)

4

Install in the reverse order

Check

5

Perform function check of driver seat backrest seat ventilation motors (M18/10) or the front passenger seat backrest seat ventilation motors (M18/12)

Referenced documents