ar9130p2001rgr

Remove/install AIRSCARF blower

Type ar · topic 91.30 · version 0100 · 2017-05-02

Applies to: Model 190 with code 403 (Airscarf system)

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.30 Seat heater, seat ventilation — Series 190

EinPAS 39 Heating/ventilation/cooling › 39.40 Head area climate control › 39.40.30 Blower motor/heating element/vent/channel — Series 190

AR91.30-P-2001RGR

Remove/install AIRSCARF blower

18.04.2017

Model

190

with code 403 (Airscarf system)

Remove/install AIRSCARF blower

P91.30-2782-08

1

Electrical connector

3

AIRSCARF blower

2

Bolts

4

Electrical connector

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Remove front seat, and place on a suitable base

AR91.10-P-1000RG


Carefully lift front seat out of vehicle.
Otherwise components in the vehicle interior may be damaged.

2

Unhook seat cover in area (arrows A) of integrated head restraint by hand


Seat cover must be unhooked by hand.
Otherwise the seat cover may be damaged.

3

Raise released part of seat cover until electrical connectors (1, 4) and screws/bolts (2) are accessible


Released part of seat cover must be raised carefully.
Otherwise the seat cover may be damaged.

Helper required.

4

Release and disconnect electrical connectors (1,4)

5

Remove screws/bolts (2), and remove AIRSCARF blower (3)

6

Install in the reverse order

Referenced documents