AR91.30-P-1920M | Remove/install blower regulator for seat ventilation motors in rear seat | 10.7.98 |
MODELS 220.0 /1
with CODE (224c) Electrically adjustable rear single seats, with seat ventilation, seat heater and memory package
with CODE (402a) Seat ventilation of rear seats
P91.30-2011-06
1 Rear seat backrest
2 Backrest frame
3 Backrest cover
4 Bolt
5 Foam insert
6 Clutch
N29/3 Left rear seat ventilation blower regulator
N29/4 Right rear seat ventilation blower regulator
| Remove/install | ||
1 | Remove rear seat backrest | With electrically adjustable rear bench seat, code 223b. | |
With rear single seats, electrically adjustable, with seat ventilation, seat heater and memory package, code 224c. | |||
2 | Place rear seat backrest (1) onto suitable clean surface with backrest upholstery (3) facing downwards. | ||
3 | Pull backrest upholstery (3) out of clip groove (see arrows) in backrest frame (2) | Relieve strain on backrest upholstery (3) by pressing down on backrest frame (2) | |
4 | Unscrew bolt (4) and remove left (N29/3) and right (N29/4) rear seat ventilator blower regulator | Make bolt (4) accessible by pushing foam rubber (5) down. | |
5 | Disconnect connector (6) from left (N29/3) and right (N29/4) rear seat ventilators | ||
6 | Install in the reverse order | ||
7 | Perform seat ventilation function test |
Referenced documents
- ar9112p1620m Remove/install rear-seat backrest
- ar9112p1620mb Remove/install rear-seat backrest