ar9130d0030ts

Remove/install heated seats control unit

Type ar · topic 91.30 · version 0100 · 2018-06-27

Applies to: Model 907, 910 with code H15 (Seat heater for front passenger) Model 907, 910 with code H16 (Seat heater for driver)

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.30 Seat heater, seat ventilation — Series 907 · Series 910

EinPAS 39 Heating/ventilation/cooling › 39.35 Seat heating/seat climate control/armrest heating › 39.35.11 Control unit/relay — Series 907 · Series 910

AR91.30-D-0030TS

Remove/install heated seats control unit

13.06.2018

Model

907, 910

with code H15 (Seat heater for front passenger)

Model

907, 910

with code H16 (Seat heater for driver)

Remove/install heated seats control unit

Shown on model 907 with code S23 (Front passenger bench seat)

1

Heated seats control unit

2

Electrical connector

3

Electrical connector

4

Catch hook

5

Catches

6

Bracket

D91.30-0012-81

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Adjust front seat until the seat heating control unit (1) is accessible.

2

Fold seat cushion padding forward.


Model 907, 910 with code S23 (Two seater front passenger seat)

AR91.10-D-1035TS

3

Switch off ignition and store transmitter key outside of transmission range (min. 2  m).

4

Disconnect electrical connection (2, 3).

To do so, release electrical connectors (2, 3).

5

Release seat heating control unit (1).

To do so, release catch hooks (4) (arrows A).

6

Remove seat heating control unit (1).

To do so, push seat heating control unit (1) from holder (6) (arrow B).

Installation: Push catches (5) into holder (6).

7

Install in the reverse order

Check

8

Perform function check of seat heating.

Referenced documents