ar9129w1400a

Removing and installing potentiometer for seat height adjustment

Type ar · topic 91.29 · version 0101 · 1999-02-10

Applies to: BODY 940.899, 942.899 with CODE (SF3) Luxury driver suspension seat "Grammer" with CODE (SF4) Luxury co-driver suspension seat "Grammer" BODY 972.899 with CODE (SF3) "Grammer" luxury driver's suspension seat with CODE (SF4) "Grammer" luxury co-driver's suspension seat

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.29 Seats - electrical system — Series 940 (models 899) · Series 942 (models 899) · Series 972 (models 899)

EinPAS 37 Interior equipment › 37.26 Front seat › 37.26.12 Sensor/switch/wiring harness — Series 940 (models 899) · Series 942 (models 899) · Series 972 (models 899)

EinPAS 37 Interior equipment › 37.27 Rear seat › 37.27.12 Sensor/switch/wiring harness — Series 940 (models 899) · Series 942 (models 899) · Series 972 (models 899)

EinPAS 37 Interior equipment › 37.28 Passenger seat › 37.28.12 Sensor/switch/wiring harness — Series 940 (models 899) · Series 942 (models 899) · Series 972 (models 899)

AR91.29-W-1400A

Removing and installing potentiometer for seat height adjustment

3.3.97

BODY 940.899, 942.899
with CODE (SF3) Luxury driver suspension seat "Grammer"
with CODE (SF4) Luxury co-driver suspension seat "Grammer"

BODY 972.899
with CODE (SF3) "Grammer" luxury driver's suspension seat
with CODE (SF4) "Grammer" luxury co-driver's suspension seat

Removing and installing potentiometer for seat height adjustment

W91.29-0001-12

1 Connector

2 Screw

3 Bracket

4 Potentiometer

5 Pin

Removal, installation

1

Remove seat cushion

AR91.10-W-3310A

2

Disconnect connector (1)

3

Remove potentiometer (4)

Installation: The flat section in the hole in the potentiometer must point toward the surface on the pin (5) on the rocker arm and the bolt on the potentiometer (4) must engage in the recess (arrow) in the bracket (3)

4

Reinstall in opposite order

Referenced documents