Removing and installing backrest drive

Type ar · topic 91.29 · version 0100 · 1997-07-17

Applies to: BODY 942.899 with CODE (SG3) "Isringhausen" driver luxury suspension seat with CODE (SG4) Front passenger luxury suspension seat

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.29 Seats - electrical system — Series 942 (models 899)

EinPAS 37 Interior equipment › 37.26 Front seat › 37.26.47 Seat adjustment — Series 942 (models 899)

EinPAS 37 Interior equipment › 37.27 Rear seat › 37.27.47 Seat adjustment — Series 942 (models 899)

EinPAS 37 Interior equipment › 37.28 Passenger seat › 37.28.46 Seat adjustment — Series 942 (models 899)

AR91.29-W-1100B

Removing and installing backrest drive

21.4.97

BODY 942.899
with CODE (SG3) "Isringhausen" driver luxury suspension seat
with CODE (SG4) Front passenger luxury suspension seat

W91.29-0008-06

1 Plug

2 Rack

3 Motor unit

4 Screw

5 Connector

6 Seat cover

7 Clamping washer

8 Cover

 	Removal, installation
1	Remove seat adjustment operating unit		AR91.29-W-1700A
2	Remove backrest cover		AR91.10-W-3321A
3	Detach seat cover (6)
4	Unplug connector (5)
5	Remove screw (4)
6	Remove rack (2); swivel motor unit (3) down for this step	 Installation: Use new clamping washers (7) and plug (1)
7	Remove motor unit (3)
8	Reinstall in opposite order