Remove/install rear seat head restraint motor

AR91.29-P-1460ME

Remove/install rear seat head restraint motor

26.09.2019

Model

167.1

with code 567 (Vario rear seat)

Model

167.9

Shown on model 167.1 with code 567 (Vario rear bench seat)

1

Electrical connector

M18/13

Left 2nd seat row head restraint height seat adjustment motor

2

Catch hook

M18/14

Right 2nd seat row head restraint height seat adjustment motor

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

 

Remove/install

1

Remove head restraints in rear passenger compartment.

Model 167.1
with code 567 (Vario rear seat)
Model 167.9
except code M036 (Maybach version)

AR91.16-P-1770ME

Model 167.9
with code M036 (Maybach version)

AR91.16-P-1770MEM

2

Remove cover from seat backrest of rear seat.

Model 167.1
with code 567 (Vario rear seat)

AR91.18-P-1872MEB

Model 167.9
with code 224 (Rear individual seat design)
except code M036 (Maybach version)

AR91.18-P-1872MEX

Model 167.9
with code M036 (Maybach version)

AR91.18-P-1872MEM

3

Disconnect electrical connector (1).

4

Release catch hook (2), slide head restraint height seat adjustment motor of 2nd seat row (M18/13, M18/14) out to one side and remove.

5

Install in the reverse order.