ar9129p1460ggg

Remove/install rear seat head restraint motor

Type ar · topic 91.29 · version 0101 · 2019-01-26

Applies to: Model 463.242 as of model year 2013 up to model year 2019

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.29 Seats - electrical system — Series 463 (models 242)

EinPAS 37 Interior equipment › 37.27 Rear seat › 37.27.47 Seat adjustment — Series 463 (models 242)

AR91.29-P-1460GGG

Remove/install rear seat head restraint motor

24.01.2019

Model

463.242

as of model year 2013 up to model year 2019

Remove/install rear seat head restraint motor

1

Head restraint

2

Electrical connector

3

Spring U-bolt

4

Hook

M27/4

Left rear seat adjustment motor for head restraint adjustment

M28/4

Right rear seat adjustment motor for head restraint adjustment

P91.29-2624-06

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Remove left or right head restraint (1)


Model 463.242
as of model year 2013 up to model year 2019

AR91.16-P-1770GGG

2

Disconnect electrical connector (2) from rear seat adjustment motor for head restraint adjustment (M27/4) or rear seat adjustment motor for head restraint adjustment (M28/4)

3

Push rear seat adjustment motor for head restraint adjustment (M27/4) or rear seat adjustment motor for head restraint adjustment (M28/4) upwards (arrow), and then slide to one side at right (arrow) and then remove downwards

Ensure that spring U-bolt (3) and hook (4) are seated correctly in backrest frame.

4

Install in the reverse order

Referenced documents