ar9129p1432n

Removing and installing front head restraint motor

Type ar · topic 91.29 · version 0100 · 1999-07-22

Applies to: MODEL 215

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.29 Seats - electrical system — Series 215

EinPAS 37 Interior equipment › 37.26 Front seat › 37.26.47 Seat adjustment — Series 215

AR91.29-P-1432N

Removing and installing front head restraint motor

12.2.99

MODEL 215

Removing and installing front head restraint motor

P91.29-2057-09

1 Tensioning element

2 Cross member

3 Electrical connector

4 Inner Torx screws

M26m4 Right head restraint adjustment up/down motor

5 Tensioning wire

6 Retaining

M25m4 Left head restraint adjustment up/down motor

Removal, installation

1

Remove tensioning element (1)

AR91.10-P-1910N

2

Remove head restraint

AR91.16-P-0040N

3

Unhook backrest cover in area of cross member (2)

4

Disconnect electrical connector (3)

5

Unscrew inner Torx screws (4) and unhook cross member (2) on right from tensioning wire (5)

Torx bit set

*000589011000

6

Press retaining clips (6) in direction of arrow and remove head restraint adjustment up/down motors (M25m4/M26m4)

7

Install in opposite order

8

Check head restraint adjustment for proper function

Removing and installing front head restraint motor

Torx bit set

000 589 01 10 00

Referenced documents