AR91.29-P-1431G | Removing and installing front seat backrest motor | 30.11.99 |
MODEL 170 with CODE (560) Left and right electrically adjustable front seats
P91.29-2143-06
1 Screw
4 Shaft
M25m5 Backrest forward/back motor
M25m5x1 Backrest forward/back motor connector
| Removal, installation | ||
1 | Remove cover on front seat backrest | Only until motor (M25m5) on left side of backrest is exposed. | |
2 | Disconnect backrest motor | ||
3 | Remove snap ring on shaft and remove shaft from backrest frame | ||
4 | Unscrew screw (1) | Installation: Ensure that rubber mount is seated properly. | |
5 | Remove backrest foward/back | ||
6 | Install in the reverse order | ||
N | Carry out operational check |
Referenced documents
- ar9118p1820g Removing and installing cover on front seat backrest