ar9129p1425slr

Remove/install seat adjustment drive motor (forward/back)

Type ar · topic 91.29 · version 0101 · 2008-06-05

Applies to: MODEL 199

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.29 Seats - electrical system — Series 199

EinPAS 37 Interior equipment › 37.26 Front seat › 37.26.47 Seat adjustment — Series 199

EinPAS 37 Interior equipment › 37.27 Rear seat › 37.27.47 Seat adjustment — Series 199

EinPAS 37 Interior equipment › 37.28 Passenger seat › 37.28.46 Seat adjustment — Series 199

AR91.29-P-1425SLR

Remove/install seat adjustment drive motor (forward/back)

13.5.08

MODEL 199

Remove/install seat adjustment drive motor (forward/back)

P91.29-2354-06

1 Bolts

2 Adjusting unit

M25m1 Seat fore/aft motor

M26m1 Seat fore/aft motor

Remove/install

Danger!

Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension

Use only approved tensioning devices; shield off hazard area if necessary.
Inspect special tools for damage and proper operation (visual inspection).
Wear protective gloves.

AS00.00-Z-0001-01A

1

Remove front seat

Type 199.3

AR91.10-P-1000SLR

Type 199.4

AR91.10-P-1000SLC

2

Lay down front seat with the bottom pointing up

Protect backrest frame and seat cushion from damage and soiling.

3

Remove bolt (1)

4

Remove seat forward/back motor (M25m1) or seat forward/back motor (M26m1) from adjusting unit (2)

Installation: Ensure correct seating of seat forward/back motor (M25m1) or seat forward/back motor (M26m1) on the drive shaft of the adjusting unit (2).

5

Install in the reverse order

6

Read out fault memory, erase if necessary

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

Referenced documents