ar9129p1425rk

Remove/install seat adjustment drive motor (forward/back)

Type ar · topic 91.29 · version 0100 · 2013-07-12

Applies to: MODEL 231

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.29 Seats - electrical system — Series 231

EinPAS 37 Interior equipment › 37.26 Front seat › 37.26.47 Seat adjustment — Series 231

EinPAS 37 Interior equipment › 37.27 Rear seat › 37.27.47 Seat adjustment — Series 231

EinPAS 37 Interior equipment › 37.28 Passenger seat › 37.28.46 Seat adjustment — Series 231

AR91.29-P-1425RK

Remove/install seat adjustment drive motor (forward/back)

26.06.2013

MODEL

231

Remove/install seat adjustment drive motor (forward/back)

1

Front seat

2

Flexible shaft

3

Flexible shaft protection

4

Electrical connector

5

Screw

6

Drive shaft

7

Seat rail

M27/1

Driver seat fore/aft adjustment motor

M28/1

Front passenger seat fore/aft adjustment motor

P91.29-2864-06

Remove/install

1

Remove front seat (1)

AR91.10-P-1000RK

2

Place front seat (1) to the rear on the front seat backrest


When setting down, use a suitable protective covering.
Otherwise the front seat backrest may be damaged.

3

Unclip flexible shaft (2) from drive shaft protection (3) and remove


Carefully only lift flexible shaft (2) until it can be removed.
Otherwise there is a danger of kinking and noise development may occur at the flexible shaft (2) during operation.

4

Disconnect electrical connector (4) at driver seat fore/aft adjustment seat adjustment motor (M27/1) or front passenger seat fore/aft adjustment seat adjustment motor (M28/1)

5

Remove screws/bolts (5) and remove driver seat fore/aft adjustment seat adjustment motor (M27/1) or front passenger seat fore/aft adjustment seat adjustment motor (M28/1) with drive shaft (6)


Do not twist four-point drive at seat adjuster with flexible shaft (2) removed or driver seat fore/aft adjustment seat adjustment motor (M27/1) or front passenger seat fore/aft adjustment seat adjustment motor (M28/1) removed.
Otherwise the even level of the two seat rails (7) must be reestablished.

6

Install in the reverse order

Referenced documents