AR91.29-P-1424V | Remove/install front seat height adjustment drive motor (front, raise/lower) | 24.9.03 |
MODEL 171.4
with CODE (275a) Memory package (driver seat, steering column, mirrors)
with CODE (242b) Electrically adjustable front passenger seat with memory
P91.29-2319-06
1 Front seat
2 Pin
3 Bearing
4 Seat cushion
5 Tie strap
6 Electrical connector
7 Screw
M27/3 Left front seat height adjustment motor
M28/3 Right front seat height adjustment motor
(for code (242b) front passenger seat power adjustment with memory)
| Remove/Install | ||
1 | Remove left or right front seat (1) | ||
2 | Place front seat (1) to the rear on the front seat backrest | When putting down use a suitable protective surface, as otherwise the paint on the backrest frame may be damaged. | |
3 | Undo bolts (2) and remove both fixtures (3) on seat cushion (4) | ||
4 | Place seat cushion (4) as far back as possible until the left front seat height adjustment motor (M27/3) or the right front seat height adjustment motor (M28/3) is accessible | ||
5 | Remove tie straps (5) and detach electrical connectors (6) on left front seat height adjustment motor (M27/3) or right front seat height adjustment motor (M28/3) | Installation: Replace tie straps (5). | |
6 | Undo bolts (7) at front and rear and remove left front seat height adjustment motor (M27/3) or right front seat height adjustment motor (M28/3) | ||
7 | Install in the reverse order |
Referenced documents
- ar9110p1000v Remove/install front seat