P91.29-2058-09
1 Tensioning straps
2 Tensioning element
3 Screw
4 Inner Torx screws
M26m6 Seat cushion forward/back motor (M26m6)
5 Cushion frame
X54/16 Horizontal seat cushion adjustment servo motor connector
| Removal, installation | ||
1 | Move front seat and seat cushion up and unhook tensioning straps (1) at bottom of front seat | ||
2 | Position front seat toward front | ||
3 | Press tensioning element (2) bottom cover upward (see arrows) | ||
4 | Disconnect horizontal seat cushion adjustment servo motor connector (X54/16) from seat cushion forward/back motor (M26m6) | ||
5 | Unscrew screw (3) from seat cushion forward/back motor (M26m6) on seat backrest cross member | | |
6 | Unscrew inner Torx screws (4, 4 each) from cushion frame (5) and remove seat cushion forward/back motor (M26m6) | | |
| |||
7 | Install in opposite order | ||
8 | Check seat adjustment for proper function |
Front seats
Number | Designation | Model 215 | |
BA91.10-P-1002-01C | Screw for seat cushion on seat adjustment device | Nm | 8 |
BA91.10-P-1005-01C | Screw for seat cushion adjustment device on cross member | Nm | 20 |
000 589 01 10 00
Torx bit set