ar9129p1421a

Removing and installing drive for seat height adjustment

Type ar · topic 91.29 · version 0101 · 2004-10-21

Applies to: MODEL 129 for front seat height adjustment drive

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.29 Seats - electrical system — Series 129

EinPAS 37 Interior equipment › 37.26 Front seat › 37.26.47 Seat adjustment — Series 129

EinPAS 37 Interior equipment › 37.27 Rear seat › 37.27.47 Seat adjustment — Series 129

EinPAS 37 Interior equipment › 37.28 Passenger seat › 37.28.46 Seat adjustment — Series 129

AR91.29-P-1421A

Removing and installing drive for seat height adjustment

19.6.98

MODEL 129
for front seat height adjustment drive

Removing and installing drive for seat height adjustment

P91.29-2027-06

1 Seat frame paneling

2 Mounting bridge

3 Screw

4 Front raise/lower motor

5 Gear

Removal, installation

1

Remove driver's seat

ra91001290100x

2

Unhook seat frame paneling (1) at top

3

Remove mounting bridge (2)

4

Unscrew screws (3) and remove cover

5

Expose leads

Remove cable straps, open clips and disconnect connector.

6

Remove motor (4) together with gear (5)

Unscrew screws (arrows) from motor (4), remove plastic bracket, unscrew screws from gear (5) and remove motor (4) with gear (5) and drive shaft.

Installation: Before installing motor (4) manually turn both gears (5) to upper-most final position.

Installation: Insert motor (4) with rubber mount and insert drive shaft.

7

Remove gear (5) from motor drive shaft (4)

Installation: Skip this step.

8

Install in the reverse order

9

Carry out operational check

Referenced documents