AR91.29-P-1420MC | Remove/install front seat (seat cushion) adjusting motors | 16.1.98 |
MODEL 220.0 /1 as of 1.9.02 with CODE (803) Model year 2003
seat cushion forward/back
P91.29-2269-09
1 Front seat
2 Stowage compartment
3 Cover
4 Belt end fitting
5 Bolt
6 Bolt
7 Bolt
12 Left side paneling
13 Rear side trim
M27m6 Seat cushion forward/back motor
M28m6 Seat cushion forward/back motor
| Remove/Install | ||
1 | Adjust front seat (1) to front | Move front and back seat cushions up as far as possible. | |
2 | Remove cover (3) from rear side trim (13) | ||
3 | Unscrew screw (5) from belt end fitting (4) | Bolt/nut at front seat belt buckle. Installation: When screwing on, please ensure that the belt end fitting (4) remains mobile. | |
4 | Remove screw (see arrow) from rear side trim (13) | ||
5 | Unscrew screw (6, see magnification) from left side trim (12) | ||
6 | Open stowage compartment flap (2) | ||
7.1 | Unclip and remove stowage compartment (2) | ||
7.2 | Remove fire extinguisher | For vehicles with fire extinguisher code 682. | |
8 | Unscrew screws (6, 2 screws) from left side trim (12) | ||
9 | Pull off left side trim (12) in direction of travel | ||
10 | Unscrew screw (7, 2 screws) from seat cushion forward/back motor (M27m6, M28m6) | Screw, seat adjuster motor. | |
11 | Remove seat cushion forward/back motor (M27m6, M28m6) from transmission | Shaft remains in transmission. | |
12 | Unplug connector from seat cushion forward/back motor (M27m6, M28m6) | ||
13 | Install in the reverse order | ||
14 | Perform function check of seat cushion forward/back facility |
Seat adjustment
Seat belts/emergency tensioning retractors