220 589 01 99 50
JPT/SPT blade
Blade holder with clamping pliers
Wiring harness repair kit
220 589 02 99 00
220 589 01 99 61
P91.29-2285-06
1 Detach coupling (arrow) on connector assignment.
P54.18-2473-01
2 Using a suitable tool, slide contact retainer (1) in direction of arrow out of locked position.
P91.29-2284-06
3 Insert unlocking tool into coupling of contact cavity 5 and remove female contact from coupling by pulling lightly on cable.
4 Insert unlocking tool into coupling of contact cavity 6 and remove female contact from coupling by pulling lightly on cable.
5 Exchange the female contact from contact cavity 6 with the female contact from contact cavity 5.
During installation pull lightly on the cables in contact cavities 5 and 6 to check that the female contacts have engaged properly into the housing.