ar9129d1701tsk

Remove/install front seat adjustment control element

Type ar · topic 91.29 · version 0100 · 2018-01-22

Applies to: Model 907, 910 with code SF1 (Electrically adjustable driver's seat) Model 907, 910 with code SF2 (Electrically adjustable co-driver's seat)

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.29 Seats - electrical system — Series 907 · Series 910

EinPAS 37 Interior equipment › 37.26 Front seat › 37.26.12 Sensor/switch/wiring harness — Series 907 · Series 910

AR91.29-D-1701TSK

Remove/install front seat adjustment control element

19.01.2018

Model

907, 910

with code SF1 (Electrically adjustable driver's seat)

Model

907, 910

with code SF2 (Electrically adjustable co-driver's seat)

Remove/install front seat adjustment control element

1

Locks

S22

Left front seat adjustment switch

S23

Right front seat adjustment switch

D91.29-0005-11

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Switch off ignition and store transmitter key outside of transmission range (min. 2 m)

2

Remove respective front door trim

AR72.10-D-6575TS

3

Remove left front seat adjustment switch (S22) or right front seat adjustment switch (S23)


Release locks (1) until it is possible to pass by the catch hook.
Otherwise, the locks (1) will be damaged.

To do so, use suitable tool to release locks (1) (arrows).
Then remove the left front seat adjustment switch (S22) or the right front seat adjustment switch (S23) from the corresponding door trim on the front door.

4

Install in the reverse order

Check

5

Perform function check of left front seat adjustment switch (S22) or right front seat adjustment switch (S23)

Referenced documents