Remove/install air pump for multicontour seat

Type ar · topic 91.25 · version 0100 · 2005-05-09

Applies to: MODELS 169.0 /3, 245.2 with CODE (404) Left multicontour seat with CODE (405) Right multicontour seat

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.25 Multicontour seat (MKS) — Series 169 (models 0**, 3**) · Series 245 (models 2**)

EinPAS 37 Interior equipment › 37.26 Front seat › 37.26.51 Pump/container — Series 169 (models 0**, 3**) · Series 245 (models 2**)

EinPAS 37 Interior equipment › 37.27 Rear seat › 37.27.51 Pump/container — Series 169 (models 0**, 3**) · Series 245 (models 2**)

EinPAS 37 Interior equipment › 37.28 Passenger seat › 37.28.51 Pump/container — Series 169 (models 0**, 3**) · Series 245 (models 2**)

AR91.25-P-1430BK

Remove/install air pump for multicontour seat

15.3.05

MODELS 169.0 /3, 245.2
with CODE (404) Left multicontour seat
with CODE (405) Right multicontour seat

P91.25-2293-04

1 Front seat

2 Electrical connectors

3 Pneumatic connector

4 Rubber buffer

M28/6 Multicontour backrest motor, driver

M28/13 Multicontour backrest motor, front passenger

 	Remove/Install
1	Release front seat (1) and fold down backwards in the vehicle	See 
		Remove/install front seat	AR91.10-P-1000AK
2	Separate the electrical connectors (2)
3	Disconnect pneumatic connector (3)
4	Release multicontour backrest motor, driver (M28/6) or multicontour backrest motor, front passenger (M28/13) from rubber buffers (4) and remove
5	Install in the reverse order