ar9121s0002c

Remove/install passenger bench seat backrest padding

Type ar · topic 91.21 · version 0100 · 2016-03-30

Applies to: Model 415.605 with code U76 (FOLD & LOAD rear bench seat with load protection grille) except code U77 (FOLD & LOAD rear bench seat, split 1/3 : 2/3)

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.21 Passenger seats — Series 415 (models 605)

EinPAS 37 Interior equipment › 37.28 Passenger seat › 37.28.42 Seat backrest/head restraint — Series 415 (models 605)

AR91.21-S-0002C

Remove/install passenger bench seat backrest padding

11.03.2016

Model

415.605

with code U76 (FOLD & LOAD rear bench seat with load protection grille)

except code U77 (FOLD & LOAD rear bench seat, split 1/3 : 2/3)

Remove/install passenger bench seat backrest padding

S91.21-4664-09

1

Backrest padding

3

Screw

5

Seat belt guide

2

Support strap

4

Mounting rail

6

Screw

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Remove passenger bench seat backrest frame

AR91.21-S-4467CA

2

Remove support straps (2) at left and right

To do this, remove screws/bolts (3).

3

Remove belt guide (5)

To do so, remove screws/bolts (6) and remove seat belt from belt guide (5).

4

Unhook mounting rails (4) from backrest frame

5

Remove padding cover with backrest padding (1) of passenger bench seat


When replacing padding cover, hold velcro strips at backrest padding (1) and carefully pull off padding cover.
Prevent damage.

Installation: Tension padding cover without creases.

6

Install in the reverse order

Referenced documents