AR91.21-D-5745A | Remove/install front panel on bench seat housing | 26.4.04 |
MODEL 903.662
with CODE (ZU8) National version for USA
with CODE (Z29) "James Cook" touring camper, NAFTA
D91.21-0003-09
1 Screw
2 Screw
5 Trim panel
6 Information labels
3 Bolts
4 Plastic disks
| Remove/Install | ||
Danger! | Risk of injury caused by body parts becoming jammed, pinched or severed by doors, covers, flaps or by loose components | Keep body parts well clear when moving doors, covers, flaps and components. Wear protective gloves and protective shoes. | |
1 | Remove bench | ||
2 | Release seat bolster and fold up | See Operator's Manual | |
3 | Remove bolt cap (1) | ||
4 | Remove screw (1) | Painted shim. | |
5 | Tilt bench seat to rear | ||
6 | Unscrew bolt (2). | Bolt (2) is fixed on inside with clamp, which has to be fitted again when reinstalled. | |
7 | Remove bolts (3) | ||
8 | Remove plastic washers (4) | ||
9 | Remove trim panel (5) | When replacing panel (5), attach information signs (6). | |
10 | Install in the reverse order |
Referenced documents
- ar9121d4000a Remove and install bench
- as0000z002501a Risk of injury caused by body parts becoming jammed, pinched or severed by doors, covers, flaps or by loose components