ar9121d4100ec

Remove/install bench seat adjustment index bolt

Type ar · topic 91.21 · version 0100 · 2005-08-10

Applies to: MODEL 903.6 with CODE (ZL9) "James Cook" touring camper

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.21 Passenger seats — Series 903 (models 6**)

EinPAS 37 Interior equipment › 37.28 Passenger seat › 37.28.46 Seat adjustment — Series 903 (models 6**)

AR91.21-D-4100EC

Remove/install bench seat adjustment index bolt

18.3.05

MODEL 903.6 with CODE (ZL9) "James Cook" touring camper

Remove/install bench seat adjustment index bolt

D91.12-1124-06

1 Bench seat

2 Seat cushion

3 Nut

4 Bolt

5 Circlip

6 Washer

7 Compression spring

8 Index bolt

 	Remove/install
 Danger!	Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	When moving components, ensure that no body parts or limbs are within the operating range of moving parts.	AS00.00-Z-0011-01A
1	Remove bench seat (1)		AR91.21-D-4000EC
2	Release seat bolster (2) and raise up	 See Operator's Manual
3	Unscrew nut (3) from bolt (4)
4	Remove bolt (4)
5	Tilt bench seat (1) back
6	Remove locking ring (5)
7	Remove shim (6)
8	Remove compression spring (7)
9	Pull index bolt (8) up and out
10	Install in the reverse order

Referenced documents

ar9121d4000ec Remove and install bench
as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.