ar9121d4070ec

Remove/install stop

Type ar · topic 91.21 · version 0100 · 2005-08-10

Applies to: MODEL 903.6 with CODE (ZL9) "James Cook" touring camper

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.21 Passenger seats — Series 903 (models 6**)

EinPAS 37 Interior equipment › 37.28 Passenger seat › 37.28.30 Passenger seat, complete — Series 903 (models 6**)

AR91.21-D-4070EC

Remove/install stop

18.3.05

MODEL 903.6 with CODE (ZL9) "James Cook" touring camper

Remove/install stop

D91.12-1103-06

1 Seat cushion

2 Bolts

3 Stops

 	Remove/install
 Danger!	Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	When moving components, ensure that no body parts or limbs are within the operating range of moving parts.	AS00.00-Z-0011-01A
1	Release seat bolster (1) and raise up	 See Operator's Manual
2	Loosen bolt (2)	 When replacing the left stop (3) affix seat bolster (1).
3	Take off stops (3)
4	Install in the reverse order

Referenced documents

as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.