ar9121d3511tsk

Remove/install passenger bench seat backrest adjustment release lever trim

Type ar · topic 91.21 · version 0100 · 2018-06-27

Applies to: Model 907.6/7 with code UR8 (Pass. compt. seats, 2seat bench 2nd row, luxury) Model 907.6/7 with code UR9 (3-passenger bench seat, Comfort, 3rd row) Model 907.6/7 with code US1 (2-passenger bench seat, comfort, 1st rear row) Model 907.6/7 with code UT4 (Passenger compartment seats, 2-passenger bench seat, 3rd row, Comfort) Model 907.6/7 with code UY1 (3-passenger bench seat, Comfort, 1st row, narrow) Model 907.6/7 with code UY2 (3-passenger bench seat, Comfort, 2nd row, narrow) Model 907.6/7 with code UY

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.21 Passenger seats — Series 907 (models 6**, 7**, 745)

EinPAS 37 Interior equipment › 37.28 Passenger seat › 37.28.70 Trim/stowage — Series 907 (models 6**, 7**, 745)

AR91.21-D-3511TSK

Remove/install passenger bench seat backrest adjustment release lever trim

13.06.2018

Model

907.6/7

with code UR8 (Pass. compt. seats, 2seat bench 2nd row, luxury)

Model

907.6/7

with code UR9 (3-passenger bench seat, Comfort, 3rd row)

Model

907.6/7

with code US1 (2-passenger bench seat, comfort, 1st rear row)

Model

907.6/7

with code UT4 (Passenger compartment seats, 2-passenger bench seat, 3rd row, Comfort)

Model

907.6/7

with code UY1 (3-passenger bench seat, Comfort, 1st row, narrow)

Model

907.6/7

with code UY2 (3-passenger bench seat, Comfort, 2nd row, narrow)

Model

907.6/7

with code UY4 (3-passenger bench seat, Comfort, 1st row)

Model

907.6/7

with code UY5 (3-passenger bench seat, Comfort, 2nd row)

Model

907.745

with code U3Y (3-passenger bench seat, Comfort, 3rd row, narrow)

Remove/install passenger bench seat backrest adjustment release lever trim

1

Lever

2

Grooved pin

3

Cover

4

Backrest padding

5

Backrest cover

6

Expansion rivet

7

Release lever trim

D91.21-0085-74

Warning

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating area of mechanical components when moving components.

AS00.00-Z-0009-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Operate lever (1).

Installation:
Observe position of grooved pin (2) relative to trim (3), seat backrest padding (4) or seat backrest cover (5).
Otherwise, damage to trim (3), seat backrest padding (4) or seat backrest cover (5) may occur.

To do so, hold lever (1) in uppermost position after operating.

2

Remove grooved pin (2).

For this purpose use suitable tool.

3

Remove expansion rivet (6).

Check expansion rivet (6).

If expansion rivet (6) is damaged.

Replace expansion rivet (6).

4

Remove release lever trim (7).

To do so, detach release lever trim (7) from lever (1).

5

Install in the reverse order

Referenced documents