ar9112p6005rt

Remove/install gas-operated strut on seat frame

Type ar · topic 91.12 · version 0100 · 2005-10-05

Applies to: MODEL 251 3rd seat row

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.12 Rear seats — Series 251

EinPAS 37 Interior equipment › 37.27 Rear seat › 37.27.40 Seat frame/mounting bracket — Series 251

AR91.12-P-6005RT

Remove/install gas-operated strut on seat frame

7.7.05

MODEL 251
3rd seat row

Remove/install gas-operated strut on seat frame

1 Lower retainer

2 Upper retainer

3 Gas-operated strut

P91.12-2889-03

Remove/install

Danger!

Injury hazard Gas-operated struts are under high pressure and can pinch and crush body parts during work

Only remove and install gas-operated struts in the relaxed position and when the components are secured properly.

AS00.00-Z-0012-01A

1

Lift up lower retainer (1) at gas-operated strut (3), detach gas-operated strut (3) at the bottom

Do not remove lower retainer (1), otherwise the pretension would be lost.

2

Lift up upper retainer (2) at gas-operated strut (3), remove gas-operated strut (3)

Do not remove upper retainer (2), otherwise the pretension would be lost.

Pay attention to installation position of gas-operated strut (3).

If necessary, replace gas-operated strut (3) and dispose of gas-operated strut (3) (used part), see:

Degas and drain gas pressure strut

OS00.00-P-1001-01A

3

Install in the reverse order

Referenced documents