Remove/install seat adjustment unit on rear seat

AR91.12-P-0010MEM

Remove/install seat adjustment unit on rear seat

14.05.2020

Model

167.9

with code M036 (Maybach version)

Shown on right side of vehicle

1

Seat adjustment unit

5

Bolts

2

Electrical connector

6

Screw

3

Electrical connector

7

Padding

4

Electrical wiring harness

 Warning

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating area of mechanical components when moving components.

AS00.00-Z-0009-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Remove rear seat cushion.

AR91.12-P-1021MEM

2

Connect ground line to battery.

AR54.10-P-0003ME

3

Move seat adjustment unit (1) backward until screws (6) are accessible.

4

Release and disconnect electrical connectors (2, 3).

5

Unclip electrical wiring harness (4) from seat adjustment unit (1).

6

Unscrew the bolts (5, 6).

 Bolt, seat adjustment unit to body

*BA91.12-P-1019-03M

7

Remove seat adjustment unit (1) from vehicle.


Carefully remove and insert seat adjustment unit (1).
Otherwise, parts in the vehicle interior may be damaged.

8

Remove padding (7) and covers on leg rest from seat adjustment unit (1).

If the seat adjustment unit (1) is replaced.

9

Install in the reverse order.

10

Read out and delete fault memory.



AD00.00-P-2000-06ME

 Rear seats

Number

Designation

Model 167

BA91.12-P-1019-03M

Bolt, seat adjustment unit to body

Nm

18