Remove/install universal holder on seat backrest

AR91.10-P-6000SR

Remove/install universal holder on seat backrest

15.12.2017

Model

453.0

with code 866 (Pre-installation for iPad cradle)

1

Bracket

2

Counterpart

3

Bolts

1

Bracket

4

Felt strip

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A



Remove

1

Remove corresponding seat backrest padding

AR91.10-P-1120SR

2

Remove screws (3)

3

Press together catch hooks (arrows) of counterpart (2) and remove counterpart (2)

4

Remove holder (1)



Install

5

Prepare an approx. 210 mm long and 10 mm wide felt strip (4) and stick on to the left recess (arrow) starting, as shown, at the holder (1)

When replacing holder (1) on backrests with fabric cover in area of holder (1).

 Do not cover up the recesses (arrows).

Self-adhesive sealing strip, 30x10x2000 mm

*BR00.45-Z-1130-01A

6

Position holder (1) on seat backrest frame

7

Position counterpart (2) on seat backrest frame and holder (1) and latch into place

8

Screw in new bolts (3) and tighten, starting at bottom left in counterclockwise direction

 Bolt, bracket to seat backrest frame

*BA91.10-P-1006-01K

9

Install seat backrest padding

AR91.10-P-1120SR

 Front seats

Number

Designation

Model 453
with code 866 (Pre-installation for iPad cradle)

BA91.10-P-1006-01K

Bolt, bracket to seat backrest frame

Nm

4

Repair materials

Number

Designation

Order number

BR00.45-Z-1130-01A

Self-adhesive sealing strip, 30x10x2000 mm

A 003 989 54 85