ar9110p1480k

Removing and installing control cable for entrance assist

Type ar · topic 91.10 · version 0100 · 1998-07-03

Applies to: MODEL 208 except CODE (241) Memory circuit for electrically adjustable left front seat except CODE (242a) Memory circuit for electrically adjustable right front seat except CODE (275a) Memory package (driver's seat, steering column, mirror)

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.10 Front seats — Series 208

EinPAS 37 Interior equipment › 37.26 Front seat › 37.26.47 Seat adjustment — Series 208

AR91.10-P-1480K

Removing and installing control cable for entrance assist

23.2.98

MODEL 208
except CODE (241) Memory circuit for electrically adjustable left front seat
except CODE (242a) Memory circuit for electrically adjustable right front seat
except CODE (275a) Memory package (driver's seat, steering column, mirror)

Removing and installing control cable for entrance assist

P91.10-2034-06

1 Driver's seat cushion
2 Hand wheel
3 Handle
4 Screw
5 Outer covering
6 Backrest fitting covering
7 Control cable
8 Seat longitudinal adjustment rail
9 Adjustment nut

Removal, installation

1

Front seat removed

AR91.10-P-1000K

2

Remove hand wheel (2), handle (3) and covering (5)

3

Unhook pull nipple (arrow) and control cable (7) from lower mount (arrow)

4

Remove covering (6, 2 screws)

5

Loosen adjustment nuts (9) and unhook control cable (7) from backrest fitting

Installation: Adjust control cable (7) so that the arrest for the seat longitudinal adjustment is fully released when the backrest is pivoted all the way to the front and locked.

6

Install in opposite order

Referenced documents