ar9110p1470q

Remove/install Bowden cables for the front seat backrest release

Type ar · topic 91.10 · version 0102 · 2007-07-09

Applies to: MODEL 209 except CODE (P98) Black Series

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.10 Front seats — Series 209

EinPAS 37 Interior equipment › 37.26 Front seat › 37.26.47 Seat adjustment — Series 209

AR91.10-P-1470Q

Remove/install Bowden cables for the front seat backrest release

25.6.07

MODEL 209 except CODE (P98) Black Series

Remove/install Bowden cables for the front seat backrest release
Remove/install Bowden cables for the front seat backrest release
Remove/install Bowden cables for the front seat backrest release

P91.10-2428-01

P91.10-2429-01

P91.10-2430-01

1 Release lever

2 Backrest frame

4 Adjusting sleeves

3 Bowden cables

Remove/install

1

Remove front seat backrest

AR91.10-P-1060Q

2

Remove upholstery from front seat backrest

AR91.18-P-1820P

3

Drill out rivets from release lever (1)

4

Remove release lever (1) from backrest frame (2)

5

Detach Bowden cables (3) from release lever (1)

6

Install in the reverse order

Adjust Bowden cables (3) using the adjusting sleeves (4) so that when the backrest is locked (drive mode) there is free travel of 0 to 1 mm at the lower release levers.

7

Carry out function check

Referenced documents