ar9110p1470k

Removing and installing control cables for front seat backrest release

Type ar · topic 91.10 · version 0100 · 1998-07-03

Applies to: MODEL 208

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.10 Front seats — Series 208

EinPAS 37 Interior equipment › 37.26 Front seat › 37.26.47 Seat adjustment — Series 208

AR91.10-P-1470K

Removing and installing control cables for front seat backrest release

23.2.98

MODEL 208

Removing and installing control cables for front seat backrest release

P91.10-2028-06

1 Backrest frame
2 Covering
3 Screws
4 Outer control cable
5 Inner control cable
6 Cable straps

Removing and installing control cables for front seat backrest release

P91.10-2031-04

1 Backrest frame

4 Outer control cable

5 Inner control cable

7 and 8 Adjustment sleeves

Removal, installation

1

Remove cover on front seat backrest

Remove only up to step 11

AR91.18-P-1820K

2

Unscrew screws (3) and remove covering (2) from backrest frame (1)

3

Unhook control cables (4 and 5) from release lever and backrest frame (1, arrows)

4

Open cable straps (6)

5

Unclip control cable mounts (arrows) on left and right inner backrest fittings and remove

6

Unhook control cables (4 and 5) from release lever (arrows) and remove

When installing ensure that control cables (4 and 5) are routed and fastened properly in the backrest frame (1)

7

Install in opposite order

Adjust control cables (4 and 5) with adjustment sleeves (7 and 8) so that idle travel of 0 - 1 mm is present at the lower release levers when the backrest is locked (driving position)

8

Check for proper function

Referenced documents