ar9110p1460lc

Remove, install backrest release

Type ar · topic 91.10 · version 0200 · 2015-04-22

Applies to: MODEL 217

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.10 Front seats — Series 217

EinPAS 37 Interior equipment › 37.26 Front seat › 37.26.47 Seat adjustment — Series 217

AR91.10-P-1460LC

Remove, install backrest release

15.4.15

MODEL

217

Modification notes

31.3.15

Release backrest and fold forward, added.

Operation step 5

Remove, install backrest release

P91.10-3825-09

1

Cover

3

Retaining tab

6

Backrest release

1.1

Retaining clamp

4

Tab

7

Cable

2

Cover

5

Screw

Remove/install

1

Remove head restraint

AR91.16-P-0040LF

2

Unclip paneling (1) upward


Using suitable tool, press on the clip lugs from the front and carefully lift off paneling (1) upwards.

Otherwise the retaining clips (1.1) will be damaged.

3

Unhook cover (2) from retaining tabs (3)

4

Unhook lug (4) of cover (2) from the backrest release side towards the middle and fold back far enough so that the screws/bolts (5) are visible


Do not remove the lug (4) with tools.
Otherwise, the cover (2) may be damaged.

5

Release backrest and fold forward

6

Remove screw/bolts (5)

7

Protect cover (2) from damage around the area of the backrest release (6)

8

Remove the backrest release (6) until the cable (7) is accessible

9

Remove cable (7) from the backrest release (6) using a suitable tool, and pull the cable (7) out of the backrest release (6) through the access opening

10

Install in the reverse order

Referenced documents