Remove/install outer trim on seat frame

AR91.10-D-1201TSK

Remove/install outer trim on seat frame

25.01.2018

Model

907, 910

with code SF1 (Electrically adjustable driver's seat)

Model

907, 910

with code SF2 (Electrically adjustable co-driver's seat)

1

Front seat

5

Tab

9

Catch

2

Screw

6

Catch

10

Cover

3

Outer cover

7

Tab

4

Seat frame

8

Catch

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Adjust front seat (1) to front

Model 907.6, 910.6 with code D50 (Full-width partition wall) Model 907.6, 910.6 with code D51 (Full-width partition wall with 1 window) Model 907.6, 910.6 with code D64 (partition wall with sliding door)

2

Move front seat (1) upward

3

Remove screw (2)

4

Partially remove outer cover (3) from seat frame (4)

 To do so, release shackle (5) from seat frame (4) arrow (A). Then press outer trim (3) on seat frame (4) out of catch (6) (arrow B) and route shackle (7) past the seat frame (4) (arrow C).

5

Remove outer trim (3)

 To do so, release locks of catch (8) (arrows D). Then slide outer trim (3) on seat frame (4) out of catch (9) (arrow E).

6

Disconnect electrical connector from backrest lumbar support push button switch

Model 907, 910 with code SE4 (Front passenger seat lumbar support) model 907, 910 with code SE5 (Driver seat lumbar support)

AR91.29-D-2550TS

7

Remove push button switch for backrest lumbar support

When replacing outer trim (3).

Model 907, 910 with code SE4 (Front passenger seat lumbar support) model 907, 910 with code SE5 (Driver seat lumbar support)

AR91.29-D-2550TS

8

Remove cover (10)

When replacing outer trim (3) or trim (10).

 To do so, use  long wedge to unclip trim (10) and remove upwards.

 Long wedge

*115589035900

9

Install in the reverse order



Check

10

Perform function check for electrical functions on front seat (1)