Remove/install driver's seat cushion

Type ar · topic 91.10 · version 0104 · 2003-09-16

Applies to: MODEL 901, 902, 903, 904, 905 with CODE (SB1) Comfort-version driver's seat MODEL 901, 902, 903, 904, 905 with CODE (SB2) Comfort-version co-driver's seat MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (SB1) Comfort-version driver's seat MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (SB2) Comfort-version co-driver's seat

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.10 Front seats — Series 901 · Series 902 · Series 903 · Series 904 · Series 905

EinPAS 37 Interior equipment › 37.26 Front seat › 37.26.41 Seat cushion — Series 901 · Series 902 · Series 903 · Series 904 · Series 905

AR91.10-D-1070B

Remove/install driver's seat cushion

1.8.96

MODEL 901, 902, 903, 904, 905 with CODE (SB1) Comfort-version driver's seat

MODEL 901, 902, 903, 904, 905 with CODE (SB2) Comfort-version co-driver's seat

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (SB1) Comfort-version driver's seat

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (SB2) Comfort-version co-driver's seat

D91.10-0008-06

2 Seat cushion

13 Release lever

16 Assembly opening

Shown on driver seat

 	Removing, installing
1	Move driver's seat to front-most position
2	Actuate front release lever (13) and move out seat cushion (2) via access cover (16)	 Installation: Push seat cushion to the rear until the arresting mechanism latches audibly.
3	Install in the reverse order