Remove/install front seat backrest padding

AR91.10-D-0003TSK

Remove/install front seat backrest padding

18.07.2018

Model

907, 910

except code SH1 (Thorax/pelvis side-impact airbag, driver)

except code SH2 (Thorax/pelvis side-impact airbag, front passenger)

1

Front seat

3

Zipper

5

Backrest frame

2

Mounting rail

4

Backrest cover

6

Electrical connector (with code H15 (Seat heating for front passenger) and code H16 (Seat heating for driver))

Shown with code H16 (Seat heating for driver)

7

Backrest padding

8

Mounting rail

9

Retaining clips

10

Heat mat (with code H15 (Seat heating for front passenger) and code H16 (Seat heating for driver))

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S



Remove

1

Adjust front seat (1).

 Until the mounting rail (2) and zipper (3) are accessible.

2

Remove head restraint guides from front seat (1).

AR91.16-D-0051TS

3

Remove armrest.

Model 907, 910 with code S22 (Armrest for driver's seat) model 907, 910 with code S25 (Armrest for front passenger seat)

AR91.10-D-3326TS

4

Remove mounting rail (2).

 Extraction hook

*140589023300

5

Completely open zipper (3).

6

Remove seat backrest cover (4) from seat backrest frame (5).

7

Disconnect electrical connection (6).

Model 907, 910 with code H15 (Seat heater for front passenger) Model 907, 910 with code H16 (Seat heater for driver)

 To do so, unlock the electrical connection (6).

8

Remove seat backrest padding (7) with seat backrest cover (4).

9.1

Remove seat backrest cover (4) from seat backrest padding (7).

Model 907, 910 except code H15 (Seat heating for front passenger) except code H16 (Seat heating for driver)
If the seat backrest cover (4) or the seat backrest padding (7) is replaced.

 To do so, unclip mounting rails (8) of seat backrest cover (4) at retaining clips (9) of seat backrest padding (7).

9.2

Remove seat backrest cover (4) from seat backrest padding (7).

Model 907, 910 with code H15 (Seat heater for front passenger) Model 907, 910 with code H16 (Seat heater for driver)
If the seat backrest cover (4), seat backrest padding (7) or heat mat (10) is replaced.

 To do so, unclip mounting rails (8) of seat backrest cover (4) at retaining clips (9) of seat backrest padding (7).

If the heat mat (10) is replaced.



Dispose of seat backrest padding (7) and heat mat (10) properly.



Install

10

Install heat mat (10) on seat backrest padding (7).

If the heat mat (10) on the seat backrest padding (7) is replaced.

Model 907, 910 with code H15 (Seat heater for front passenger) Model 907, 910 with code H16 (Seat heater for driver)

AR91.30-D-0008TS

 Use new seat backrest padding (7) and heat mat (10).

11

Attach seat backrest cover (4) to seat backrest padding (7).

If the seat backrest cover (4), seat backrest padding (7) or heat mat (10) is replaced.

 To do so, clip in mounting rails (8) of seat backrest cover (4) at retaining clips (9) of seat backrest padding (7).
Check retaining clips (9).

 Ensure that the seat backrest cover (4) is correctly seated on the seat backrest padding (7).

If a retaining clip (9) is damaged.



Replace seat backrest padding (7).

12

Install seat backrest padding (7) with seat backrest cover (4).

 Ensure that the seat backrest cover (4) and seat backrest padding (7) are seated correctly.

13

Connect electrical connector (6).

Model 907, 910 with code H15 (Seat heater for front passenger) Model 907, 910 with code H16 (Seat heater for driver)

14

Attach seat backrest cover (4) to seat backrest frame (5).

15

Close zipper (3).

16

Attach mounting rail (2).

17

Install armrest.

Model 907, 910 with code S22 (Armrest for driver's seat) model 907, 910 with code S25 (Armrest for front passenger seat)

AR91.10-D-3326TS

18

Install head restraint guides on front seat (1).

AR91.16-D-0051TS

19

Adjust front seat (1).

 Set to original position.