P88.85-2002-09
1 Molding
2 Screw
3 Rubber seal
7 Molding
8 Screws
4 Molding
5 Screws
6 Installation wedge
| Removal, installation | ||
1 | Remove glass roof | See Owner's Manual | |
2 | Remove molding (1) by unscrewing | Screws (2), 3 each | |
3 | Pull off rubber seal (3) in area of door cutout | Installation: Coat rubber seal (3) with soap solution | |
4 | Unscrew screws (5) on molding (4) and unclip molding (4) in area of side window with installation wedge (6) | | |
5 | Remove molding (7) by unscrewing | Installation: Install molding (7) in previous position or adapt to door window | |
6 | Install in opposite order |
Installation wedge
110 589 03 59 00