ar8880t4000b

Remove/install drip molding

Type ar · topic 88.80 · version 0101 · 2005-07-12

Applies to: MODELS 613.355 /358 /388 /455 /485

Where it sits

Function group 3 Body › 88 Detachable body components, exterior flaps › 88.80 Cover strips — Series 613 (models 355, 358, 388, 455, 485)

EinPAS 35 Body/frame/detachable parts › 35.38 Bumper/spoiler/outer trim/stowage box/front protective paneling › 35.38.44 Trim/trim element/front protective paneling — Series 613 (models 355, 358, 388, 455, 485)

AR88.80-T-4000B

Remove/install drip molding

31.3.00

MODELS 613.355 /358 /388 /455 /485

Remove/install drip molding

T88.80-0009-06

1 Clamping piece

2 Drip molding

Remove

1

Loosen drip molding (2) from clamping elements continuously

To avoid damage to the molding, pry off only in area of clamping elements

Remove damaged clamping elements (1), for this purpose lift retaining lug over retaining pin with thin screwdriver, move away to side and remove.

*115589035900

Install

2

Replace clamping elements (1)

Position on retaining pin and slightly slide to side with hammer until retaining lug catches.

3

Mark position of clamping elements on body surface with chalk

4

Install drip molding (2)

Press onto clamping elements with ball of hand.

Press drip molding on only in area of clamping elements.

Remove/install drip molding

Assembly wedge

115 589 03 59 00