ar8880p6000tx

Remove/install longitudinal member paneling

Type ar · topic 88.80 · version 0100 · 2004-09-13

Applies to: MODEL 219.3

Where it sits

Function group 3 Body › 88 Detachable body components, exterior flaps › 88.80 Cover strips — Series 219 (models 3**)

EinPAS 35 Body/frame/detachable parts › 35.38 Bumper/spoiler/outer trim/stowage box/front protective paneling › 35.38.42 Longitudinal member panel — Series 219 (models 3**)

AR88.80-P-6000TX

Remove/install longitudinal member paneling

29.7.04

MODEL 219.3

Remove/install longitudinal member paneling

P88.80-2100-09

1 Longitudinal member paneling

2 Expansion clip

3 Screw

7 Clip

8 Seal

9 Gasket

4 Expansion clip

5 Expansion clip

6 Seal

Remove/Install

1

Remove expansion clips (2)

Installation: Replace damaged expansion clips (2).

2

Unscrew bolt (3) from rear fender liner

3

Remove expansion clips (4) form rear fender liner

Installation: Replace damaged expansion clips (4).

4

Remove expansion clips (5) from front fender liner

Installation: Replace damaged expansion clips (5).

5

Open front and rear doors

6

Unclip longitudinal member paneling (1) from longitudinal member with mounting wedge

*110589035900

Installation: Replace damaged clips (7) on longitudinal member paneling (1)

Ensure that longitudinal member paneling (1) is seated correctly on all mounting points on longitudinal member

7.1

Transfer seal (6, 8)

Only when replacing longitudinal member paneling (1).

8

Install in the reverse order

Remove/install longitudinal member paneling

Mounting wedge

110 589 03 59 00