P88.50-0374-06
1 Rubber grommet
2 Round cover
3 Cover on rear center section
P88.50-0379-06
4 Trunk lock
5 Locking cylinder
6 Control cable
P88.50-0383-06
7 Screw
8 Pneumatic line
9 Trunk lid remote release element
10 Bracket
11 Control cable
12 Transfer lever
| Removal, installation | ||
1 | Pull rubber grommet (1) off of pneumatic element for putting up trunk lid (6) | ||
2 | Press catches on round cover (2) in direction of arrow | ||
3 | Pull round cover (2) off of pneumatic element for putting up trunk lid | ||
4 | Remove covering on rear center section (3) | ||
5 | Remove trunk lock (4) | ||
6 | Remove lock cylinder (5) and unhook control cable (6) | ||
7 | Unscrew screw (7) | ||
8 | Disconnect pneumatic line (8) | ||
9 | Remove trunk lid remote release element (9) with bracket (10) through cutout for lock cylinder in rear center section | ||
10 | Unhook control cable (11) on bracket (10) and transfer lever (12) | ||
11 | Install in opposite order |
Referenced documents
- ra88001290502x 0502 - Removal and installation of push button lock, trunk lid lock and locking eye Model 129