P88.40-0202-06
1 Windshield washer nozzle cover
2 Check valve cover
3 Plug connection retainer
4 Screws
5 Catch lug
6 Insulating mat retainers
P88.40-0203-01
7 Engine hood hinge
8 Electric plug connection
9 Water hose
10 Electric lead
11 Retaining clip
12 Installation hook
| Removal, installation | ||
1 | Open engine hood | Move engine hood to upright position | |
2 | Place fender protectors on fenders | ||
3 | Remove cover (2) by pressing on catch lugs (5, arrow) | Use screwdriver | |
4 | Unclip clip (3) and disconnect electric plug connection (8) | ||
5 | Pull electric lead (10) out of engine hood | ||
6 | Pull water hose (9) off of check valve and pull out of engine hood | ||
7 | Mark installation position of engine hood on engine hood hinges | This facilitates installation | |
8 | Remove screws (4) on engine hood | Secure engine hood with second | |
| When the engine hood is replaced seal joints before painting, after installation preserve with hollow cavity wax | ||
9 | Remove engine hood with second person and put down on suitable surface | Avoid damaging paint Installation: When installing pay | |
Adjust engine hood | |||
10 | Reinstall in opposite order |
Engine hood
Referenced documents
- ar8840p1000e Opening engine hood, moving to upright position and closing
- ar8840p3020e Adjust engine hood