ar8840d3020f

Adjust engine hood

Type ar · topic 88.40 · version 0100 · 2013-02-13

Applies to: MODEL 909

Where it sits

Function group 3 Body › 88 Detachable body components, exterior flaps › 88.40 Engine hood, front flap — Series 909

EinPAS 35 Body/frame/detachable parts › 35.36 Hood/flap/cover › 35.36.30 Engine hood — Series 909

AR88.40-D-3020F

Adjust engine hood

28.01.2013

MODEL

909

Adjust engine hood

1	Hood lock top section
2	Nut
3	Locking pin
4	Stop buffer

D88.40-1127-06

	Adjust
1	Adjust width of gap between engine hood and fender	 By horizontally offsetting hinges (picture A).
		Gap width for engine hood/left, right fender	*BE88.40-N-1001-01A
2	Adjust hood depth and flushness in relation to fender	 By vertically offsetting engine hood (picture B).
		 Collar nut, engine hood to hinge	*BA88.40-N-1001-01A
3	Detach engine hood lock top section (1) and align with hood lock bottom section
4	Tighten engine hood lock top section (1)
5	Loosen nut (2) and adjust locking pin (3) to correct height
6	Tighten nut (2)
7	Adjust height of front engine hood on stop buffer (4) on right and left	Height offset between engine hood and fender	*BE88.40-N-1002-01A

Adjustment values for engine hood

Number	Designation		MODEL 909
BE88.40-N-1002-01A	Height offset between engine hood and fender	mm	1

Adjustment values for engine hood

Number	Designation		MODEL 909
BE88.40-N-1001-01A	Gap width for engine hood/left, right fender	mm	5...6

 Engine hood

Number	Designation		MODEL 690.6, 901, 902, 903, 904, 905, 909
BA88.40-N-1001-01A	Collar nut, engine hood to hinge	Nm	23