AR88.40-B-3000A | Remove/install engine hood | 12.02.16 |
Body 384.810, 384.872, 384.888 with Vehicle 384, 386
B60.80-0052-06
1 Engine hood
2 Hood fastening screws
3 Headlamps and lights wire harness
4 Hood triggering spring
A- Special tool
| Remove and install | ||
Danger! | Risk of injuries and damages when starting the engine with the gearbox engaged and when carrying out work with the engine hot or running | ||
Danger! | Risk of personal injuries and material damage while tilting the engine hood | During hood tilting, always keep the area clear of people and objects. | |
1 | Tilting the engine hood (1) | ||
2 | Disconnect headlamps and lights wire harness (3) on both sides | Remove plastic covers. | |
Loosen lock lever from connectors and remove them. | |||
3 | Cut plastic wire ties and move wire harness (3) away | Install: Apply new plastic wire ties. | |
4 | Support the engine hood (1) | Take necessary care not to damage the engine hood. | |
5 | Remove the engine hood (1) actuation springs (4) | | |
| |||
6 | Loosen and remove the fastening screws (2) from engine hood (1) to cross bar | Install: Apply new locknuts. | |
| |||
7 | Remove the engine hood (1) | Take necessary care not to damage the engine hood. | |
Install: When installing the engine hood regulate it, if required. | |||
8 | Install in the reverse order |
Engine hood
Número | Denominação | Cab 384.8, 694.8, 696.8 | |||
BA88.40-B-1001-01A | Bolt fastening the engine hood to the cross member | M10 | Nm | 65 | |
M12 | Nm | 110 | |||
055 589 04 31 00
Device
055 589 00 37 00
Lock pliers
Referenced documents
- ar8840b1000a Opening engine hood, moving to upright position and closing
- as0000b000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
- as8840b000101a Risk of injury caused by pinching and crushing when opening and closing engine hood