ar8820w2000e

Remove/install front bumper

Type ar · topic 88.20 · version 0101 · 2006-04-06

Applies to: BODY 375.840, 944.899

Where it sits

Function group 3 Body › 88 Detachable body components, exterior flaps › 88.20 Bumpers — Series 375 (models 840) · Series 944 (models 899)

EinPAS 35 Body/frame/detachable parts › 35.38 Bumper/spoiler/outer trim/stowage box/front protective paneling › 35.38.30 Front bumper — Series 375 (models 840) · Series 944 (models 899)

AR88.20-W-2000E

Remove/install front bumper

28.3.06

BODY 375.840, 944.899

Remove/install front bumper

W88.20-1007-09

1 Bolt

2 Bolt

5 Bumper

3 Bolt

4 Bolt

 	Remove/install
1	Fold up cover on pulling device and unscrew bolts (2).		*BA88.20-N-1001-01D
2	Remove coupling pin from pulling device
3	Fold up step in center of bumper and unscrew bolts (1).		*BA88.20-N-1001-01D
4	Unscrew bolts (4) on left and right headlamp and fold out headlamp.
5	Remove electrical connector from headlamps
6	Unscrew bolts (3) from left and right entrance		*BA88.20-N-1001-01D
7	Lift bumper (5) off of frame crossmember and remove electrical connectors from turn signal lamps and front fog lamps.
8	Install in the reverse order

 Bumper

Number	Designation			Body 375.810/840, 940.899, 944.899


BA88.20-N-1001-01D	Bolt, bumper to underbody	M6	Nm	8
		M8	Nm	18
		M10	Nm	51