ar8820s2000a

Removing and installing front bumper

Type ar · topic 88.20 · version 0104 · 2010-01-27

Applies to: MODEL 638

Where it sits

Function group 3 Body › 88 Detachable body components, exterior flaps › 88.20 Bumpers — Series 638

EinPAS 35 Body/frame/detachable parts › 35.38 Bumper/spoiler/outer trim/stowage box/front protective paneling › 35.38.30 Front bumper — Series 638

AR88.20-S-2000A

Removing and installing front bumper

5.5.95

MODEL 638

Removing and installing front bumper

S88.20-2500-09

1 Bumper
2 Side guide

4 Mounting screws

3 Inner fender

Removal, installation

1

Unscrew license plate

2

Remove inner fender (3) in left and right front fenders

AR88.10-S-1300A

3

Unscrew screws on left and right
in wheelhouse

Plastic screws with spreading plugs

4

Unscrew mounting screws (4) at front

*BA88.20-N-1001-01E

5

Slide bumper (1) out of side guide (2)
and remove

On vehicles with code F46
Disconnect pressure line for headlamp cleaning system

On vehicles with code J65
Disconnect connector for outside temperature sensor

Installation: Slide bumper (1)
into guide (2) on left and right

6

Reinstall in opposite order

Bumper

Number

Designation

Model
638

BA88.20-N-1001-01E

Screws for bumper on cross member

Nm

4

Referenced documents