Remove/install front bumper

AR88.20-P-2000TX

Remove/install front bumper

27.7.10

 

Remove/install

1

Open engine hood

AR88.40-P-1000TX

2

Remove front section of fender liner from left front fender (6) and right front fender (18)

AR88.10-P-1310TX

3

Unscrew bolts (4) from radiator grille (3)

 Radiator grille (3) remains on front bumper (2).

4

Slightly pivot radiator grille (3) toward front, reach behind radiator grille (3) and unscrew bolts (5) from front crossmember

5

Unclip outside temperature display temperature sensor (B14) from front bumper (2)

6.1

Disconnect front PTS separation point (X26/27)

Only with code (220) Parktronic system (PTS)

7

Disconnect electrical connector (1) from left front fog lamp (E5/1) and right front fog lamp (E5/2)

8

Unscrew bolt (7) from left and right terminal strip (8)

9

Pivot left and right terminal strip (8) into guide pins (9) and press toward front into catch point (arrow)

 Left and right terminal strip (8) remains on front bumper (2).

10

Lift left front fender (6) and right front fender (18) out of retaining clip (12) with assembly wedge (10)

 Installation: Ensure that clip (13) is seated correctly on left and right retaining clip (12).



*110589035900

11

Remove bolt (14)

12

Remove front bumper (2) toward front with aid of helper

 Carefully remove front bumper (2) with aid of helper, otherwise adhesive foils (11, 16) and paint can be damaged.

 Installation: Install front bumper (2) at side into mounts (17, 19) and lugs for front bumper (2) into housing (15) of left front lamp unit (E1) and housing (15) of right front lamp unit (E2).

13.1

Disassemble front bumper (2) and assemble

Only when replacing front bumper (2).

AR88.20-P-2050TX

14

Install in the reverse order

15

Check gaps on front bumper (2), adjust if necessary

 See:

Gap dimensions on hoods, doors and lids

AR60.00-P-0700-01Y

Gap dimension between engine hood and bumper "Dimension C".

*BE60.00-P-1001-01O



*129589032100

16.1

Check Parktronic system (PTS) for proper function

Only with code (220) Parktronic system (PTS)

 Switch off ignition, PTS control unit performs self-test automatically

17

Check adjustment for left front fog lamp (E5/1) and right front fog lamp (E5/2), correct if necessary



Check and correct the adjustment of the headlamps

AP82.10-P-8260TX

18

Close engine hood

Number

Designation

Model
219

BE60.00-P-1001-01O

Gap dimension

Engine hood to fender

Dimension "A"

mm

3.5 (0.5)

Engine hood to headlamp

Dimension "B"

mm

4.0 (0.5)

Engine hood to bumper

Dimension "C"

mm

4.0 (0.5)

Engine hood to A-pillar

Dimension "Q"

mm

-

Fender/headlamps

Dimension "R"

mm

-

Bumper to headlamp (circumferential)

Dimension "S"

mm

-

Retaining rail, bumper to engine hood

Dimension "T"

mm

-

Retaining rail, bumper to engine hood

Dimension "U"

mm

-

See picture

AR60.00-P-0700-01Y