AR88.20-P-2000P | Remove/install front bumper | 11.3.08 |
MODEL 203.0 /2 (except 203.076 /276),
203.7## #A,
203.7## #E up to 035817
P88.20-2140-09
1 Bumper paneling
2 Screw
3 Retaining clip
E5/1 Left front fog lamp
E5/2 Right fog lamp
4 Screw
5 Bracket
| Remove/install | ||
1 | Remove inner fender in both front fenders | Remove front fender liner and detach center fender liner | |
2 | Unscrew bolt (4) | ||
3 | Swivel anchor bracket (3) to middle of vehicle, pull back and take off | ||
4 | Remove outside temperature indicator temperature sensor | ||
5 | Disconnect electrical connectors from left front fog lamp (E5/1) and right front fog lamp (E5/2) | ||
6 | Remove bolts (2) | | |
7 | Remove bumper paneling (1) toward front from left and right bracket (5) | ||
8 | Install in the reverse order | ||
9 | Check adjustment for left fog lamp (E5/1) and right fog lamp (E5/2), correct if necessary | ||
| Check and correct the adjustment of the headlamps |
Bumper
Referenced documents
- ap8210p8260p Check and correct the adjustment of the headlamps
- ar5430p6341p Remove/install outside temperature indicator temperature sensor
- ar8810p1300p Remove/install fender liner in front fender